First, i’m just says : Sorry... my english is bad..!!!
Auto reboot can be happend when we rooting an android device
and install some Apk, there may crashing in the system, some can be resolved
with factory reset in phone
(Menu-Setting-Privacy-Factory data reset), but in other case it’s can’t be
resolved.. , like my experience on Samsung Galaxy S Advance, i can’t resolved it with phone factory data reset, auto
shutdown (crash) still happend again and again.. i’m very stress because i bought my
phone hardworkly, a claim guarantied is impossible, because my
device is rooted...
Then i found the way.. it’s possible for samsung other type
too .. directly,.. this is the way :
- You can Download SGSA 2.36 Firmware, Flasher n Manual here (Indonesian's PDA/CSC version only) getting password & ecxtract it , for other country or other type you can visit sammobile, just register and then you can choice by Model, OS, type and Country.. automatically, you find the device firmware and service pack then download and ecxtract it;
- Next step (it’s same for all PDA/Kernel version) and attention this is really factory reset like a new device, you are lucky if you have a back up for app, phone contact/sms before it;
- On PC, Install Downloader Program (Odin3 v1.83.exe) in GT-I9070 Flasher + Pit folder and open it;
- Enable the check mark by click on the following options :
- Auto Re-Partition, Reboot, and F. Reset Time
- Check PIT and browse to GT-I9070 Flasher + Pit folder choice GT-I9070_EUR_XX_8G_20111220_KL6.pit
- Check PDA, and CSC Files browse to Kernel and CSC folder choice I9070DXLD1_I9070OLBLD1_HOME.tar.md5 (it same for PDA and CSC choice)
- Enter into Download Mode;
- Enter into Download Mode by pressing Volume Down button, Home button, and ON/OFF Button simultaneously. Once the 1st warning screen appears, press Volume UP button for custom OS download mode. Then the 2nd display will appear
- Connect the device to PC via Data Cable ( Connect phone and PC with data cable and check USB debugging - menu-setting-application-develpment-USB debugging);
- Make sure that the one of communication port [ID:COM] box is highlighted inyellow. The device is now connected with the PC and ready to download the binary file into the device.
- Start download binary file into the device by click Start Button on the screen (wait about 10-15 minutes);
- the green colored "PASS!" sign will appear on the upper-left box if the binary file has been successfully downloaded into device
- Disconnect the device from the Data cable;
- Your device like a new device when you buy from a store;
- so, if you want to sell your device, do this way too (fully factory reset);
- Enjoy it and Thank's for visits, n please comment.... or maybe donate ... lol...
